QQ客服 官方微博 反馈留言

	电弧超声对09MnNiDR钢焊接接头冲击性能的影响
	吴敏生 ; 张雁军 ; 李路明 ; 郝红伟 ; WU Minsheng ; ZHANG Yanjun ; LI Luming ; HAO Hongwei
	2010-06-08 ; 2010-06-08
关键词	焊接自动化技术 电弧超声 低温钢 晶粒细化 冲击韧性 robotic welding technology arc-excited ultrasonic cryogenic steel grain refinement impact toughness TG407
其他题名	Arc-excited ultrasonic welding to improve the quality of 09MnNiDR joints
中文摘要	通过调制电弧激发出超声并应用于09M nN iDR钢的埋弧自动焊过程。采用常规焊接工艺参数,并加入不同频率的电弧超声进行焊接工艺评定。金相分析表明,在电弧超声作用下,焊缝结晶组织明显细化,焊缝区针状铁素体增加。冲击实验表明,接头的低温冲击韧性提高。尤其是在50 kH z超声作用下,-70℃下焊缝区和热影响区冲击韧性值较未加入超声时均提高了近50%,相应的断口扫描电子显微镜(SEM)分析表明接头由解理断裂转变为韧性断裂。电弧超声还可降低接头对焊接热输入的敏感性,提高生产效率。实验证明电弧超声是提高低温钢焊接接头性能的一种有效的方法。; The electrical arc welding frequency was modulated to excite ultrasonic waves in submerged arc welding of cryogenic 09MnNiDR steel.The arc-excited ultrasonic welding procedure was evaluated by comparing conventional welding techniques with arc-excited ultrasonic welding at different frequencies.Metallographic analyses show that the ultrasonic welding significantly refines the grains with more acicular ferrite appears in the fusion zone.Impact tests show that the ultrasonic welding also enhances the joint impact toughness.At 50 kHz,the impact toughness at-70 ℃ was improved by nearly 50% both in the fusion zone and in the heat affected zone compared with welding without ultrasonic excitement.Scan electron microscope(SEM fractography shows that fractures changes from cleavage fractures without ultrasonic to gliding fractures with ultrasonic welding.The arc-excited ultrasonic welding also reduces the welding line-energy sensitivity and improves production efficiency.; 国家自然科学基金资助项目(50375080)
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/47825]
专题	清华大学
推荐引用方式 GB/T 7714	吴敏生,张雁军,李路明,等. 电弧超声对09MnNiDR钢焊接接头冲击性能的影响[J],2010, 2010.
APA	吴敏生.,张雁军.,李路明.,郝红伟.,WU Minsheng.,...&HAO Hongwei.(2010).电弧超声对09MnNiDR钢焊接接头冲击性能的影响..
MLA	吴敏生,et al."电弧超声对09MnNiDR钢焊接接头冲击性能的影响".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。