Three-Dimensional Modeling of Heat Transfer and Fluid Flow in Laminar-Plasma Material Re-Melting Processing | |
Wang HX; Cheng K; Chen X; Pan WX(潘文霞) | |
刊名 | International Journal of Heat and Mass Transfer |
2006 | |
通讯作者邮箱 | cx-dem@mail.tsinghua.edu.cn |
卷号 | 49期号:13页码:2254-2264 |
ISSN号 | 0017-9310 |
通讯作者 | Chen, X (reprint author), Tsing Hua Univ, Dept Engn Mech, Engn Thermophys Div, Beijing 100084, Peoples R China. |
中文摘要 | Modeling study is performed concerning the heat transfer and fluid flow for a laminar argon plasma jet impinging normally upon a flat workpiece exposed to the ambient air. The diffusion of the air into the plasma jet is handled by using the combined-diffusion-coefficient approach. The heat flux density and jet shear stress distributions at the workpiece surface obtained from the plasma jet modeling are then used to study the re-melting process of a carbon steel workpiece. Besides the heat conduction within the workpiece, the effects of the plasma-jet inlet parameters (temperature and velocity), workpiece moving speed, Marangoni convection, natural convection etc. on the re-melting process are considered. The modeling results demonstrate that the shapes and sizes of the molten pool in the workpiece are influenced appreciably by the plasma-jet inlet parameters, workpiece moving speed and Marangoni convection. The jet shear stress manifests its effect at higher plasma-jet inlet velocities, while the natural convection effect can be ignored. The modeling results of the molten pool sizes agree reasonably with available experimental data. |
学科主题 | 力学 |
类目[WOS] | Thermodynamics ; Engineering, Mechanical ; Mechanics |
研究领域[WOS] | Thermodynamics ; Engineering ; Mechanics |
关键词[WOS] | ATMOSPHERIC-PRESSURE ; JETS ; LONG ; GAS |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000238269800022 |
公开日期 | 2007-06-15 ; 2007-12-05 ; 2009-06-23 |
内容类型 | 期刊论文 |
源URL | [http://dspace.imech.ac.cn/handle/311007/16541] |
专题 | 力学研究所_力学所知识产出(1956-2008) |
推荐引用方式 GB/T 7714 | Wang HX,Cheng K,Chen X,et al. Three-Dimensional Modeling of Heat Transfer and Fluid Flow in Laminar-Plasma Material Re-Melting Processing[J]. International Journal of Heat and Mass Transfer,2006,49(13):2254-2264. |
APA | Wang HX,Cheng K,Chen X,&潘文霞.(2006).Three-Dimensional Modeling of Heat Transfer and Fluid Flow in Laminar-Plasma Material Re-Melting Processing.International Journal of Heat and Mass Transfer,49(13),2254-2264. |
MLA | Wang HX,et al."Three-Dimensional Modeling of Heat Transfer and Fluid Flow in Laminar-Plasma Material Re-Melting Processing".International Journal of Heat and Mass Transfer 49.13(2006):2254-2264. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论