x-ray grazing incidence optics are widely used in x-ray astronomy, especially for imaging payloads wolter optics are the most workhorse. however, as there are two cascaded mirrors in wolter type, the efficiency is quite low after two reflections. in this paper a kind of nested conical concentrator is developed with only one reflection to concentrate the x-ray photons and obtain the timing information. the mirror length is 200mm, the mirror foils cover from 38.8 to 100mm in diameter. d263t glass of 0.3mm thickness is used as mirror substrate with iridium film deposited in order to improve the x-ray reflection. the d263t glass is slumped at 580°c with precisely machined and polished mold. 3d printed resin serves as upper mold for glass cutting. the quality of mirror substrate is mainly determined by the surface of forming mandrel. as the surface roughness is quite important for x-ray reflection, after deposition it is tested with interferometer and afm, and the roughness is 0.6nm. mirror integration based on visible light is built, and the conical mirrors are assembled and adjusted by real time monitoring for the focal point of visible light. with the monochromic x-ray source, the concentrator efficiency is tested as 38%@1.49kev, 20%@4.51kev. the focal point is φ8.2mm in xray, with 80% of its energy encircled in a 4mm width. this kind of x-ray concentrator could be used in x-ray navigation, x-ray communication and other x-ray timing astronomy. © 2017 spie.